Best sellers
What are Korean skin boosters and which one will be best for you?
August 21, 2024
1 Comment
Read More »
New skinboosters
Check out newly curated products
Buy and earn 8 Points! Learn more 
Liztox 100U is a botulinum toxin type A product from South Korea, designed to reduce fine lines and wrinkles by relaxing facial muscles. Each vial contains 100 units of freeze-dried toxin and comes with saline, syringe, gloves, and alcohol swabs for preparation. For professional use only.
Main Benefits of Liztox 100U
Smooths Wrinkles
Helps reduce the appearance of fine lines and dynamic wrinkles by relaxing facial muscles.
Fast-Acting Results
Visible improvements typically appear within a few days after treatment.
Trusted Effectiveness
Delivers results comparable to well-known botulinum toxin brands, giving users a reliable option for wrinkle treatment.
High-Quality Manufacturing
Made in South Korea with strict quality controls to ensure safe and consistent results users can trust.
Indications
Liztox 100U is designed for aesthetic treatments that help reduce the appearance of facial wrinkles and fine lines. It works by temporarily relaxing specific muscles to improve overall facial smoothness and rejuvenation.
-
Facial Rejuvenation & Wrinkle Reduction
Liztox 100U targets dynamic facial wrinkles such as frown lines (glabellar lines), forehead lines, and crow’s feet, helping to create a smoother, more refreshed appearance. -
Muscle Relaxation
Temporarily relaxes facial muscles that cause visible lines, preventing the deepening of wrinkles over time. -
Common Treatment Areas
Typically used on the forehead, between the eyebrows, and around the eyes for cosmetic enhancement.
Results typically last 3 to 4 months, depending on the individual and treatment area. For best results, Liztox should be administered by a licensed medical professional.
How is Liztox made
Liztox 100U is produced by culturing Clostridium botulinum bacteria under controlled laboratory conditions. The botulinum toxin type A is then purified and freeze-dried into a fine powder to ensure stability and effectiveness. The final product is packaged in a sterile, colorless glass vial and does not contain any preservatives.
What Liztox is made of
-
Clostridium Botulinum Toxin Type A (100U)
A purified neurotoxic protein that temporarily blocks nerve signals to targeted muscles, reducing the appearance of dynamic facial wrinkles. -
Human Serum Albumin (0.5 mg)
A protein derived from human blood plasma, used to stabilize the toxin and maintain its effectiveness after reconstitution. -
Sodium Chloride (0.9 mg)
Commonly known as salt, this helps balance the solution's pH and tonicity for safe injection.
Mechanism of action
Liztox 100U works by temporarily blocking the nerve signals that cause specific muscles to contract. The active ingredient, Clostridium Botulinum Toxin Type A, targets the connection between nerves and muscles. When injected, it prevents the release of acetylcholine—a chemical messenger responsible for muscle movement. As a result, the treated muscles relax, and the overlying skin appears smoother and less wrinkled.
This process does not affect surrounding areas and allows natural facial expressions to be maintained when properly administered by a medical professional.
Why does Liztox 100U look Empty? (Video Explanation)
Product preparation
Before use, Liztox 100U must be reconstituted with 0.9% sterile saline (sodium chloride injection) to create an injectable solution. The product comes as a fine, freeze-dried powder in a colorless, transparent glass vial.
Materials Needed:
0.9% sterile saline
Sterile 30G 0.5cc insulin syringe
Latex gloves
Alcohol swabs
Preparation Steps:
Remove the vial from the refrigerator and visually inspect. The powder should appear white or light yellow.
Using a sterile syringe, slowly add the desired amount of 0.9% saline to the vial (refer to the dilution table below).
Gently swirl the vial to mix—do not shake.
Once reconstituted, store in a refrigerator (2–8°C) and use within 24 hours.
How to dilute Liztox 100U
Liztox comes in a vial containing a fine, freeze-dried powder containing 200 units of Botulinum toxin type A that needs to be diluted with 0.9% saline.
Note: The powder is very fine, so the vial may look empty. Rest assured that all units are present.
|
Diluent Added (0.9% Sodium Chloride) |
|
|---|---|
|
Liztox® 100U |
Resulting Dose (U/0.1 mL) |
|
1.0mL |
10U |
|
2.0mL |
5U |
|
2.5mL |
4U |
|
4.0mL |
2.5U |
|
8.0mL |
1.25U |
Step-by-Step Dilution Instructions:- Follow the following steps to dilute & reconstitute your toxin.
- Take the vial out of the refrigerator and visually inspect: the vial should be colorless and transparent with a small quantity of white/light yellow freeze-dried powder.
- Using the table below, draw Saline (0.9% Sodium Chloride) into a syringe and slowly add it to the vial.
- Gently and slowly swirl the vial to mix, do not shake excessively.
- The reconstituted product should be kept in the refrigerator (2-8℃) and used within 24 hours
Note: Manufacturers recommend using the toxin within 24 hours of dilution, but research has shown that the reconstituted product remains stable for up to 5 weeks in the refrigerator (2-8℃).
Treatment areas
Liztox 100U is most commonly used to treat dynamic wrinkles caused by repeated muscle movement. Typical facial treatment areas include:
Glabellar lines (frown lines between the eyebrows)
Forehead lines
Crow’s feet (lines around the outer corners of the eyes)
Bunny lines (wrinkles on the bridge of the nose)
Chin dimpling
Masseter (jawline slimming)
Eyebrow lift (to subtly raise the brows)
Dosage and technique
Liztox 100U is administered intramuscularly and should only be used by qualified medical professionals familiar with the anatomy of the injection sites.
Injection Method (for Glabellar Lines):
Use a 30-gauge needle.
Inject 0.1 mL (4 Units) into five points:
Two points in each corrugator muscle
One point in the procerus muscle
Total dosage: 20 Units
Post-treatment
Use an ice pack on the injection site to reduce pain, swelling, or bruising.
Avoid makeup immediately after treatment.
Do not take blood-thinning medications (e.g., Vitamin E, aspirin, NSAIDs) for 10–14 days before and after treatment.
Avoid massaging or applying pressure to the treated area.
Course of Treatments
How quickly will the result appear?
Before & Afters
What's Inside
4X Liztox Set Includes
- 4 packs of Liztox 100U
- Saline (Isotonic Sodium Solution) 4 vials, 20ml ea.
- ten (10) 30g 8mm 0.5cc Insulin Syringes
- 4 Pair of Latex Gloves
- 4 Alcohol Swabs
FAQ
Liztox is a botulinum toxin type A used to temporarily reduce dynamic facial wrinkles, such as frown lines, forehead lines, and crow’s feet.
Initial results may be noticeable within 3–5 days, with full effects visible around 10–14 days after treatment.
Results typically last 3 to 4 months. Repeat treatments are recommended to maintain results.
Keep the vial refrigerated at 2–8°C (35.6–46.4°F). Once diluted, it should be used within 24 hours.
No, it must be reconstituted with 0.9% sterile saline before injection.
No. Liztox should only be administered by trained medical professionals. Self-use is not recommended and may lead to complications.
Liztox 100U offers exceptional wholesale appeal due to its industry-leading purity level, which represents a new quality standard in botulinum toxin manufacturing. This Korean product provides quick onset and long-term effects, making it cost-effective for practices with regular botulinum toxin treatment schedules. Our wholesale program includes proper storage protocols and complete product documentation. For Liztox 100U wholesale pricing and volume requirements, please submit our Wholesale Application.
How to properly store
Store unopened vials in a refrigerator at 2–8°C (35.6–46.4°F).
Do not freeze.
Once reconstituted, the solution must be kept refrigerated and used within 24 hours.
Protect from light and do not use if the solution appears discolored or contains particles.
Do not use beyond the expiration date printed on the vial.
Liztox 100U is intended for use by licensed medical professionals only. Improper storage or handling may affect product quality. We are not responsible for outcomes resulting from misuse, improper administration, or storage outside the recommended conditions.
What are the wholesale requirements for Liztox kit purchases?
Our Liztox wholesale program is designed for practices that use botulinum toxin treatments regularly. Each kit includes the complete setup with saline and accessories needed for professional application. Liztox maintains high purity standards and comes with proper documentation for professional use. The wholesale program has specific volume requirements and is structured for ongoing business relationships rather than one-time purchases. To learn about minimum orders and pricing structure, please fill out our Wholesale Application for a detailed consultation.
Works great
Great product
Great price
Product Benefits Excellent results
Age 65
I found this product to be excellent quality. The Meamo customer service is top notch!